Page 259 - CSS FAT PIG_LR

Working Time: 20 minutes @ 20°C

Loading Time: 3 hours @ 20°C Drilled Cored Damp Wet

4 4 4 4

Steel Zinc Plated to AS1791-1986.

Minimum thickness 6 micron.

Recommended for internal applications only.

Steel Hot Dipped Galvanised to AS1650-198

and AS1214-1983.

Minimum thickness 42 micron.

For external applications.

Anchor can be through fixed into substrate

using fixture as template.

Suitable for wall applications.

Suitable for overhead applications.

Suitable for floor applications.

Suitable for hollow brick/block and hollow

core concrete applications.

MATERIAL SPECIFICATION SYMBOLS

Indicates the base material and surface finish to assist in sele

INSTALLATION RELATED SYMBOLS

Indicates the suitable positioning and other installation relate

Suitable for AAC and lightweight concrete

applications.

Cracked concrete.

Vertical Down

Horizontal

Vertical Up

Underwater

Suitable for use in seismic design.

high resistance to cyclic loading.

AISI Grade 316 Stainless Steel, resistant to corro

agents including chlorides and industrial polluta

Recommended for internal or external applicatio

in marine or corrosive environments.

Stainless Steel High Corrosion resistance.

HCR Grade 1.4529/1.4565.

Steel Zinc Plated to AS1791-1986.

Minimum thickness 6 micron.

Recommended for internal applications only.

Steel Hot Dipped Galvanised to AS1650-1989

and AS1214-1983.

Minimum thickness 42 micron.

For external applications.

Anchor can be through fixed into substrate

using fixture as template.

Temporary or removable anchor.

Suitable for wall applications.

Suitable for overhead applications.

Suitable for floor applications.

Suitable for hollow brick/block and hollow

core concrete applications.

Suitable for use in drilled holes.

Suitable for use in cored holes.

Chemical anchors suitable for use in dry hole

Chemical anchors suitable for use in damp ho

Chemical anchors suitable for use in holes

filled with water.

MATERIAL SPECIFICATION SYMBOLS

Indicates the base material and surface finish to assist in selection with regard to corrosion or environmental issues.

INSTALLATION RELATED SYMBOLS

Indicates the suitable positioning and other installation related requirements.

Suitable for contact with drinking water

for human consumption

Suitable for AAC and lightweight concrete

applications.

Corrosion resistant.

Not recommended for direct exposure to sunli

Cracked concrete.

HCR

ChemSet™ Reo502™ Extra Heavy Duty Epoxy Anchoring Adhesive

StructaSet™ 401 Fast Cure, Heavy Duty Epoxy Acrylate Anchoring Adhesive

Working Time: 6 minutes @ 20°C

Loading Time: 50 minutes @ 20°C Drilled Cored Damp Wet

4 4 4 ✘

Suitable for use in seismic design.

Anchor has an effective pull-down feature,

or is a stud anchor. It has the ability to clamp

the fixture to the base material and provide

high resistance to cyclic loading.

Has good resistance to cyclic and dynamic

loading. Resists loosening under vibration.

Steel Zinc Plated to AS1791-1986.

Minimum thickness 6 micron.

Recommended for internal applications only.

Steel Hot Dipped Galvanised to AS1650-1989

and AS1214-1983.

Minimum thickness 42 micron.

For external applications.

Anchor can be through fixed into substrate

using fixture as template.

Suitable for wall applications.

Suitable for overhead applications.

Suitable for floor applications.

Suitable for hollow brick/block and hollow

core concrete applications.

PERFORMANCE RELATED SYMBOLS

Indicates the suitability of product to specific types of performan

MATERIAL SPECIFICATION SYMBOLS

Indicates the base material and surface finish to assist in selecti

INSTALLATION RELATED SYMBOLS

Indicates the suitable positioning and other installation related r

Suitable for AAC and lightweight concrete

applications.

Cracked concrete.

Vertical Down

Horizontal

Vertical Up

Hollow Brick & Concrete Block

Working Time: 6 minutes @ 20°C

Loading Time: 50 minutes @ 20°C Drilled Cored Damp Wet

4 ✘ 4 ✘

Suitable for use in seismic design.

Anchor has an effective pull-down feature,

or is a stud anchor. It has the ability to clamp

the fixture to the base material and provide

high resistance to cyclic loading.

Has good resistance to cyclic and dynamic

loading. Resists loosening under vibration.

Steel Zinc Plated to AS1791-1986.

Minimum thickness 6 micron.

Recommended for internal applications only.

Steel Hot Dipped Galvanised to AS1650-1989

and AS1214-1983.

Minimum thickness 42 micron.

For external applications.

Anchor can be through fixed into substrate

using fixture as template.

Suitable for wall applications.

Suitable for overhead applications.

Suitable for floor applications.

Suitable for hollow brick/block and hollow

core concrete applications.

PERFORMANCE RELATED SYMBOLS

Indicates the suitability of product to specific types of perform

MATERIAL SPECIFICATION SYMBOLS

Indicates the base material and surface finish to assist in sele

INSTALLATION RELATED SYMBOLS

Indicates the suitable positioning and other installation relate

Suitable for AAC and lightweight concrete

applications.

Cracked concrete.

Vertical Down

Horizontal

Vertical Up

Hollow Brick & Concrete Block

ChemSet™ 101 Plus Fast Cure, General Purpose Polyester Anchoring Adhesive

Product Pack Size Pack Qty Order Number

Reo 502™ 750 ml 12 REO502J StructaSet™ 401 750 ml 12 S401J StructaSet™ 401 380 ml 20 S401C ChemSet™ 101 Plus 750 ml 12 C101J ChemSet™ 101 Plus 380 ml 20 C101C ChemSet™ 101 Plus 2 x 380 ml Kit 10 ISKP ChemSet™ Universal Applicator 1 1 CUA

• Extra Heavy Duty Load • Long working time for Deep Embedment • Suitable for oversized diameter holes • Suitable for core drilled holes • Dry, damp, wet and underwater • Quick 3 hour loading at 20°C

• ETA Certifcation • Potable water Certifcation • Heavy Duty Load • Suitable for core drilled holes • Fast loading

• Economical Styrene Free Polyester • Fast Loading • Suitable for hollow substrates with accessories

ChemSet™ ChemICAL ANChORING

259