Page 265 - CSS FAT PIG_LR

Features &

• The TruBolt ™

maximum sh Its cold forge • The anchor d pull-down on application of load.

• The anti-rotation expansion sleeve is designed to grip the sides of the hole, preventing anchor rotation during installation.

anchor dia equals hole dia

Specifcation

material - Bolt Carbon Steel, Stainless Steel 316 (A4) Corrosion Protection Zinc Plating, Hot Dipped Galvanising Head styles Hex Nut Fixing method Through Fixture setting method Torque Controlled anchoring method Expansion

Thread Diameters M6, M8, M10, M12, M16, M20 anchor/Hole Diameters 6mm, 8mm, 10mm, 12mm, 16mm, 20mm Indicative Working Max Tensile 3.4kN - 32.5kN Loads in 32mPa Concrete Max Shear 2.8kN - 27.3kN substrates Concrete, Solid Brickwork

Description

The TruBolt ™ Stud Anchor is a true-to-size, heavy duty, torque controlled expansion anchor, for permanent anchoring into concrete.

TruBolt ™ Stud Anchor Hex Nut - ZINC, GALVANISED & STAINLESS STEEL

ChemSet ™ Anchor Studs

Description Part No Box Quantity ChemSet ™ Anchor Stud M8 x 110 Zinc CS08110 10 ChemSet ™ Anchor Stud M8 x 110 Galvanised CS08110GH 10 ChemSet ™ Anchor Stud M8 x 110 Stainless CS08110SS 10 ChemSet ™ Anchor Stud M10 x 130 Zinc CS10130 10 ChemSet ™ Anchor Stud M10 x 130 Galvanised CS10130GH 10 ChemSet ™ Anchor Stud M10 x 130 Stainless CS10130SS 10 ChemSet ™ Anchor Stud M12 x 160 Zinc CS12160 10 ChemSet ™ Anchor Stud M12 x 160 Galvanised CS12160GH 10 ChemSet ™ Anchor Stud M12 x 160 Stainless CS12160SS 10 ChemSet ™ Anchor Stud M12 x 180 Zinc CS12180 10

ChemSet ™ Anchor Stud M16 x 190 Zinc CS12190 10 ChemSet ™ Anchor Stud M16 x 190 Galvanised CS12190GH 10 ChemSet ™ Anchor Stud M16 x 190 Stainless CS12190SS 10 ChemSet ™ Anchor Stud M20 x 260 Zinc CS20260 6 ChemSet ™ Anchor Stud M20 x 260 Galvanised CS20260GH 6 ChemSet ™ Anchor Stud M20 x 260 Stainless CS20260SS 6 ChemSet ™ Anchor Stud M24 x 300 Zinc CS24300 6 ChemSet ™ Anchor Stud M24 x 300 Galvanised CS24300GH 6 ChemSet ™ Anchor Stud M24 x 300 Stainless CS24300SS 6

Description Part No Box Quantity

Description

ChemSet ™ Anchor Studs are made from Grade 5.8 carbon steel to get the most out of adhesive tensile capacities and provide higher shear capacities than regular Grade 4.6 grade studs. Galvanising of ChemSet ™ Anchor Studs meets Australian Standards. Stainless Steel ChemSet ™ Anchor Studs are high corrosion resistant AISI 316 (A4).

Features and Benefts

• High Performance Grade 5.8 Carbon Steel • Zinc Plated for indoor or dry climates

• Hot dip galvanised to AS1650 and AS1214 • Hot dip galvanised to 42 micron for exterior applications

• High Performance AISI316 Stainless Steel for Coastal Applications • Pre-cut to standard chemical anchoring lengths

• Supplied with nuts and washers • Depth set mark to ensure correct embedment • Reliable external hex drive for installing capsules

ChemSet ™ Anchor Studs

tRUBOLt™ & ChemSet™ ANChOR StUDS

265