Page 243 - CSS FAT PIG_LR

FORCED ENTRY

8MM BALLISTIC POINT STEP DRIVE PIN FOR STEEL AND HARD CONCRETE

Part No. Description mm mm mm qty qty

SC50038 50 x 8mm head 8 4 50 100 1000 SC50042 60 x 8mm head 8 4 60 100 1000 SC50048 75 x 8mm head 8 4 75 100 1000

8MM DRIVE PIN WITH TOP HAT

Part No. Description mm mm mm qty qty

50138 5/8" (knurled) x 8mm head 8 3.7 16 100 5000 50140 3/4" x 8mm head 8 3.7 19 100 5000 50144 1" x 8mm head 8 3.7 25 100 5000

8MM WASHERED PIN WITH TOP HAT WITH 7/8” (22MM) WASHER

Part No. Description mm mm mm qty qty

DP820W Washered Drive Pins 20mm With Top Hat 8 3.7 20 100 1000 DP825W Washered Drive Pins 25mm With Top Hat 8 3.7 25 100 1000 DP830W Washered Drive Pins 30mm With Top Hat 8 3.7 30 100 1000

8MM DRIVE PIN WITH INSULATION WASHER 1-7/16” (36MM) WASHER 0.9MM THICK

Part No. Description mm mm mm qty qty

50122 1-1/2" x 8mm head 8 3.7 38 100 1000 50126 2-1/2" x 8mm head 8 3.7 65 50 500

8MM PINS WITH CEILING CLIP WITH CEILING CLIP

Part No. Description mm mm mm qty qty

50368 1" x 8mm head 8 3.7 25 100 1000 50374 1-1/4" x 8mm head 8 3.7 32 100 1000

8MM DRIVE PIN WASHERED WITH 7/8” (22MM) WASHER

Part No. Description mm mm mm qty qty

50090 1" x 8mm head 8 3.7 25 100 1000 50092 1-1/4" x 8mm head 8 3.7 32 100 1000 50094 1-1/2" x 8mm head 8 3.7 38 100 1000

8MM DRIVE PIN FOR USE IN PA3500, PA351, P3X

Part No. Description mm mm mm qty qty

50016 5/8" (knurled) x 8mm head 8 3.7 16 100 5000 50182 3/4" (knurled) x 8mm head 8 3.7 19 100 5000 50022 3/4" x 8mm head 8 3.7 19 100 5000 50026 1" x 8mm head 8 3.7 25 100 5000 50032 1-1/4" x 8mm head 8 3.7 32 100 1000 50034 1-1/2" x 8mm head 8 3.7 38 100 1000 50036 1-3/4" x 8mm head 8 3.7 45 100 1000 50038 2" x 8mm head 8 3.7 50 100 1000 50040 2-1/4" x 8mm head 8 3.7 57 100 1000 50042 2-3/8" x 8mm head 8 3.7 60 100 1000 50044 2-1/2" x 8mm head 8 3.7 65 100 1000 50046 2-3/4" x 8mm head 8 3.7 70 100 1000 50048 3" x 8mm head 8 3.7 75 100 1000 50050 3-7/8" x 8mm head 8 3.7 97 100 1000

To provide resistance to pullover, these pins are available with pre assembled 14 gauge (1.9mm) metal washers. Resistance to pullover is increased by the additional bearing surface provided by the washer.

243