Page 234 - CSS FAT PIG_LR

Removable and reusable The Blue-Tip SCREWBOLT™ anchor is easy to remove, leaving a neat clean hole. Unlike traditional anchors no grinding off of anchors is needed and no anchor components are left in the hole. If required Blue-Tip SCREWBOLT™ can be reused in the same hole after recificatin or adjustment of the fixing application

Vibration The Blue-Tip SCREWBOLT™ anchor is vibration resistant. Unlike traditional anchors that have a small expansion mechanism, the double lead threads grip a large portion of the embedment length and there are no expansion forces to pulverize the concrete. For additional vibration resistance, the ratchet teeth on the underside of the hex washer head lock against the fixture.

TIGHT-FIT – matches standard fixture holes The Blue-Tip SCREWBOLT™ anchor is designed to match standard fixture clearance holes that are 2mm to 3mm over nominal to provide a secure fit. Since the Blue-Tip SCREWBOLT™ is specially matched to the clearance hole, the need for layout or hole spotting is eliminated.

Immediate high strength loading The Blue-Tip SCREWBOLT™ anchor can be loaded immediately. Unlike adhesive anchors, there is no lengthy curing time. This allows for immediate completion of fastening applications

Shallow embedment depth

The Blue-Tip SCREWBOLT™ anchor can be installed at shallower embedment depths than traditional wedge or sleeve anchors reducing the chance of striking reinforcing bars or embedded cables. Drilling time and bit wear can be reduced resulting in significant savings.

Concrete, Block, Brick The Blue-Tip SCREWBOLT™ anchor is versatile and can be used in a variety of base materials. This reduces the need to stock assorted anchor types and learn a variety of installation procedures.

Full grip vs. small grip Blue-Tip SCREWBOLT™ anchors have specially designed dual threads that engage the base material immediately upon installation. Unlike traditional expansion anchors, they will not spin in the hole during installation.

Close to edge installs The Blue-Tip SCREWBOLT™ anchor cuts a thread into the base material. Since there are no expansion forces, the Blue-Tip SCREWBOLT™anchor can be installed closer to the edge than traditional mechanical anchors without damaging the base material.

One-piece design The Blue-Tip SCREWBOLT™ anchor is a one-piece unit which features a finished hex head formed with an integral washer, a patented dual lead thread, and a chamfered tip.A one-piece design eliminates the possibility of lost anchor parts or improper assembly.

RELIEF THREAD – low installation torque A specially designed relief thread formed in the body of the anchor allows easy tightening at a reduced torque level and provides dust relief to help reduce jamming of the anchor.

3D3D

MECHANICAL ANCHORING

234